Turntable

Essential Features to Look For In the Best Turntables

A turntable might be used for the purpose of entertainment, however, the purchase should not be done hastily. Failing to take your time and weight your options, as suggested by the Pickmyturntable blog, could lead to future frustrations. Therefore, you should examine the features below to make sure that you get the most effective and efficient turntable to meet your needs, desires, and money today!

USB Connectivity

You will like to determine, whether or not USB connectivity is compulsory for your own situation. This relatively new technology is now readily available in these quite antique devices. USB connectivity will give extra functionality and will provide you with the ability to convert your records into digital files, that would be stored on your device. The addition of this feature might increase the price a bit, however, a lot of people will agree that it will be well worth the price.

Speeds Of Playback

Now, you should know that every record would need a particular playback speed. There are three individual playback speeds, that include 78, 45, and 33-1/3 RPM. Not all turntables would be able to function at all speeds. If you want to play all and any record, you would like to have access to each. Selecting a three-speed turntable is suggested.

Essential Features to Look For in the Best Turntables

Automatic or Manual Operation

If you choose to go with an automatic turntable, it means that you prefer convenience over things that needs a lot of steps in order to get to point B. All you need to do with an automatic turntable is set the record on top of the platter and push the button. The arm of the turntable then lifts up and moves directly on the first groove of the album in order to start playing its record. When the album ends, the automatic operated turntable’s arm goes back to its initial position. If you have watched movies that are set in the past, like those that created the steam engines, then chances are you’ve seen manual turntables. With manual turntables, you need to lift the arm and lower it gently on the first groove of the record. With this option, it will provide the users to skip songs, but this comes with a risk. If the human operating the manual turntable do not know how to take care of manually putting the arm on the vinyl record, there’s a high chance they are going to damage the record grooves.

Direct Drive or Belt Drive

The belt drives of the turntable rotate the platters on top of the bearing. The motor in this type is located at the side, thus the platter connected to the motor with the rubber belt, which spins the record. The platter’s isolation from the turntable’s motor prevent those unwanted vibration and noise. The belts are also there to absorb the shock in which it lessens the shock waves. With the direct drive type, it places the platters directly on the device’s motor shaft. This is why there is no need for the belt to spin the vinyl records. A lot of audiophiles love this drive type because the consistency of the platter speed gives out a more accurate replication of the sound.

Cartridge

The cartridge of the turntable comprises of several wires and magnets which are enclosed with a housing unit referred to as the stylus. It is mounted at the end of its tone arm. The cartridge’s quality all depends on how the bundle of wires and magnets interact with each other in order to replicate the high quality sound. Cartridges belonging to the higher end means that the cost of the turntable becomes more expensive. Most of the cartridges can provide the users between 500 to 1000 hours playing time.

Ratio of Signal-to-Noise

Most of the turntable manufacturers offer buyers with a number wherein it defines the background noise’s level. Make sure that you look for 70 decibels and above. This indicates that the turntable provides more signal with music than just background music.

Speed Variation

This factor measures the record’s speed spinning deviation. The album’s speed spinning deviation influences the sound quality simply by changing the music pitch or just causing the audio wavering. The speed variations must never exceed 0.25 percent.